User's Manual User Manual

For each Output GPI, the output mode, the pulse duration and the offset value can be set
when defining the Output GPI. For more detailed information, refer to the Playlist Panel
user manual.
The Output GPIs Settings window is used to determine how to use the TTL GPIs and to
specify the Advance value.
Advance
In the Advance field, you can specify how many seconds ahead of the timecode (on
which the GPI tag is defined) the Output GPI signal should be sent by the IPDirector.
3.1.6. OSD Settings
Overview
The On-Screen Display settings allow the users to select the category of information to be
displayed for each playout channel. This does not apply to recorder channels or software
player.
42 3. System Management
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.B