User's Manual User Manual

IP Director
–
Version 5.9
–
User’s Manual
–
Part 9: Edit While Playout
EVS Broadcast Equipment – January 2011
Issue 5.9.B
The user can execute this command from either the Master or the Slave IPEdit.
A global message is displayed in the global status bar to inform the user if the
timeline has been successfully synchronized, or if the synchronization has failed.
It is recommended to synchronize the TLEs regularly after committing changes to
the Master TLO.
TLO PLAYSYNC BUTTON
The TLO PlaySync button is only relevant with the Master/Slave redundancy.
In this configuration, pressing the TLO PlaySync button on the Slave IPEdit will
synchronizing the TLO playout on the Slave IPEdit to the TLO playout in progress
on the Master IPEdit.
When the synchronized playout of both TLOs is active, the button is displayed on
a blue background on the Slave IPEdit.
Note
The TLO on the Master IPEdit needs to be in PLAY for the TLO PlaySync
command to work on the Slave IPEdit.
1.3.6 SPEED NUDGING BUTTONS
The speed nudging consists of transport commands that allow adjusting manually
and momentarily the playout speed of a timeline in order to resynchronize the
playing TLO to an external program feed played through a vision mixer.
TLO NUDGE DECREASE BUTTON
or + (on numeric pad)
Pressing the TLO Nudge Decrease button decreases temporarily the TLO playout
speed. Then, it comes automatically back to its original speed. If you press the
button several times, the effect speed decrease effect lasts longer.
TLO NUDGE INCREASE BUTTON
or + (on numeric pad)
Pressing the TLO Nudge Increase button increases temporarily the TLO playout
speed. Then, it comes automatically back to its original speed. If you press the
button several times, the effect speed increase effect lasts longer.
7