User Manual

Issue 5.9.B IPDirector Version 5.9
–
User Manual
–
Part 8: Editing - IPEdit
EVS Broadcast Equipment - January 2011
172
4.13.7 SWAP/MUTE CONFIGURATION WINDOW
WINDOW VARIATIONS
You can access the Swap/Mute Configuration window:
• from the general timeline display, to apply a swap to an audio track of a
timeline element, from its IN point to its OUT point
• from the Swap/Mute Zoom display, to apply a swap from a mark IN to a mark
OUT point placed on the audio track.
Some additional fields are available at the bottom of the Swap/Mute Configuration
window when you access it from the Swap/Mute Zoom display. For this reason,
this window will be described below:
HOW TO ACCESS THE SWAP/MUTE CONFIGURATION WINDOW
From the General Display of a Timeline
To access the Swap/Mute Configuration window, proceed as follows:
• Right-click the element in an audio track on which you want to define a swap
and Select Add Swap/Mute.
From the Swap/Mute Zoom Display of a Track
To access the Swap/Mute Configuration window, proceed as follows:
• After you have specified where you want to perform the swap, right-click on the
track where to define a swap and select Add Swap/Mute.