User Manual

IPDirector Version 5.9
–
User Manual
–
Part 8: Editing - IPEdit
EVS Broadcast Equipment – January 2011
Issue 5.9.B
103
HOW TO LIFT MEDIA BETWEEN THE MARK IN AND MARK OUT
To delete a part of a timeline between the mark IN and mark OUT in Overwrite
mode, proceed as follows:
1.
Toggle to the button by clicking the
Insert/Overwrite Global
Mode button.
2. Activate the Timeline Track Selection buttons for which you want to delete
a part of the timeline.
3. Add a mark IN point and a mark OUT point to delimit the part of the timeline
to delete.
4.
Press .
The part of the timeline selected is deleted and replaced by a blank element.
4.6.3 EXTRACTING TIMELINE ELEMENTS OR PARTS OF A TIMELINE
PRINCIPLE
When you delete timeline elements or a part of a timeline in Insert mode, i.e.
extract them, the elements that remain in the timeline are shifted so that no blank
is left.
HOW TO EXTRACT ELEMENTS FROM A TIMELINE
First Method
To delete elements from a timeline in Insert mode, proceed as follows:
1.
Toggle to the button by clicking the Insert/Overwrite Global
Mode
button.
2. Select the elements of the timeline to be extracted by clicking or lassoing
them. See also section 4.4.3, on page 80 for more information.
3.
Press .
The selected elements are deleted and the remaining elements in the timeline are
shifted to the left.