User Manual

IPDirector Version 5.9
–
User Manual
–
Part 8: Editing - IPEdit
EVS Broadcast Equipment – January 2011
Issue 5.9.B
99
In this action, the reference position in the Player is matched to the nowline in the
timeline.
4.5.6 CHANGING THE CAMERA ANGLE OF TIMELINE ELEMENTS
INTRODUCTION
You can change the camera angle of timeline elements according to the following
rules:
• Changing the elements of a single clip by a linked clip
• Changing the elements (max. 20) of one or more clips by A/V material having
the same TC IN and OUT and recorded on other recorders on the XNet
network.
PROCEDURE
To change one or more timeline elements by another one, which would allow you
to change the camera angle, proceed as follows:
1. Select the timeline elements you want to replace (see also the section
4.4.3).
T
o select specifically elements created on a given camera angle, do the
following:
a. Activate the tracks to be taken into account in the selection.
b. If requested place a mark IN and mark OUT points to delimit the portion
where to apply the selection.
c. Right-click in the timeline and select Select Camera from the contextual
menu.
The requested elements are selected.
2. Right-click one of the elements and select Replace by in the contextual
menu.