User's Manual Owner's manual

Issue 5.9.B IPDirector Version 5.9

–

User Manual

–

Part 5: Playout

–

Player Control Panel

EVS Broadcast Equipment – January 2011

MARK OUT

OR OR

When pressing the button, you set an OUT point at the timecode shown on the jog

bar of the Control Panel. The timecode of the OUT point is then displayed in the

OUT field.

CLEAR IN

OR +

If you select the cross next to the Mark IN button, the following happens:

• The IN point will be cleared and the IN field reset if an IN point was marked on

a live record chain.

• The timecode for the maximum clip IN point including guardbands is displayed

in the Protect IN field if an IN point was marked on a clip.

CLEAR OUT

OR +

If you select the cross next to the Mark OUT button, the following happens:

• The OUT point will be cleared and the OUT field reset if an OUT point was

marked on a live record chain.

• The timecode for the maximum clip OUT value including guardbands is

displayed in the Protect OUT field if an OUT point was marked on a clip.

UPDATE CLIP BUTTON

If a clip that is loaded to a channel has had a change made to the IN, OUT, NAME,

or other data entered when originally saved, pressing UPDATE CLIP will save the

new settings.

The update clip operation can also be done using the shuttle pro: