User's Manual Owner's manual

IPDirector Version 5.9

–

User Manual

–

Part 5: Playout

–

Player Control Panel

EVS Broadcast Equipment – January 2011

Issue 5.9.B

3. Protect OUT field: end timecode of the final guardband

4. OUT field: timecode of the OUT point

5. Duration field: time interval between the IN and OUT point, i.e. clip duration

Note

When a growing clip is loaded, the Protect OUT field and the OUT field

display --:--:--:--

GOTO IN BUTTON

OR OR +

The Goto IN button, active when a clip is loaded, takes the media to the IN frame

and timecode.

GOTO OUT BUTTON

OR OR +

The Goto OUT button, active when a clip is loaded, takes the media to the OUT

frame and timecode.

If a growing clip is loaded on a player channel and the user presses the Goto OUT

button, the system will play near “live”, i.e. at the closest position from the live.

MARK IN

OR OR

When pressing the button, you set an IN point at the timecode shown on the jog

bar of the Control Panel. The timecode of the IN point is then displayed in the IN

field.