User's Manual

Issue 5.9.B IPDirector Version 5.9
–
User Manual
–
Part 4: Ingest
EVS Broadcast Equipment – January 2011
56
3.4 VTR CONTROL PANEL MODE 2: SINGLE
CLIP DIGITIZE MODE
3.4.1 PURPOSE
In Single Clip Digitize Mode, a single clip can be digitized from the VTR to a
recorder channel on an EVS video server. In the digitize process, clips can be
sent to different destinations and published to user groups.
3.4.2 SCREEN ELEMENTS AND FUNCTIONS
The Transport Mode buttons and controls remain the same in Single Clip Digitize
Mode. Refer to section 3.3 “VTR Control Panel Mode 1: Transport Mode”, on page
53 for details.
Th
e extra fields and buttons for Single Clip Digitize Mode are explained below.
MARK IN - DURATION - MARK OUT
The Mark IN, Duration and Mark OUT fields are editable.
Values can be entered directly from the keyboard. After entering two values, the
third value is calculated automatically.
MARK IN / MARK OUT BUTTONS
Instead of entering values in the Mark IN - Duration - Mark OUT fields, these
values can be set by clicking the Mark IN and Mark OUT buttons while the tape is
playing.
Existing values can be cleared by clicking the corresponding button.