User's Manual User Manual

Issue 5.9.B IPDirector

Version 5.9

–

User Manual

–

Part 1: General Workspace

EVS Broadcast Equipment – January 2011

3.3.9 HOW TO UNGANG GANGED CHANNELS

To ungang ganged channels, proceed as follows:

1. Select the ganged channels with SHIFT+click or CTRL+click.

2. Right-click one of the channels and select Ungang.

Note

Channels can be selected even if they are part of different groups. Each

selected channel will be removed from the ganged group of channels it

was part of.

3.3.10 HOW TO ASSOCIATE CHANNELS IN PGM/PRV MODE

This mode allows you to play several clips ‘back to back’, with transition effects.

When playing single clips, the next clip can be selected on the PRV channel and a

TAKE button is present and active on the designated PGM control panel in this

mode, to allow the clip that is selected on PRV to be transitioned to manually.

When running a playlist, this mode provides the PRV channel that is necessary for

using transitions.

Please refer to the section on PGM/PRV settings in the Control Panel chapter for

a detailed description of the available settings for this mode.

At least 2 player channels must be available to define this association.

To associate channels in PGM/PRV mode, proceed as follows:

1. Select two channels with SHIFT+click or CTRL+click.

• Right-click one of the selected channels and select Pgm/Prv.