User's Manual User Manual

IPDirector Version 5.9
–
User Manual
–
Part 1: General Workspace
EVS Broadcast Equipment -– January 2011
Issue 5.9.B
101
Button Description
LAST CLIPS Displays the list of last created clips and allows the
selection of a clip by using the wheel,
Automatically loads the last created clip on the controlled
channel.
MENU: gets out of the Last Created Clips list.
ENTER: appends the selected clip to the default playlist.
SHIFT - ENTER: inserts the selected clip to the default
playlist before or after the on-air element.
SEND TO Sends the media to the destinations predefined in the
Remote Control Manager window.
Playlists: sends the loaded playlist.
Clips: sends the loaded clip or marked portion of loaded
clip.
Trains: sends the marked portion of loaded train.
Refer to section ‘Selecting Destination Targets’ on page
99.
GANG When channels have previously been ganged, this
function ungangs, or re-gangs channels.
GRAB Playlists / clips / trains:
Saves a small image of the loaded media for use as a
thumbnail. The thumbnail image will be that of the current
position when you click the GRAB button.
SEL REC Displays a menu with the list of available recorder
channels.
Refer to section ‘Loading a Train’ on page 110.
PLAY Playlists / clips / trains:
Plays the media loaded on the controlled channel.
PLAY VAR Playlists / clips / trains:
Plays the media loaded on the controlled channel at
speed defined in the Control Panel settings.
PAUSE Playlists / clips / trains:
Stops the playout of the media loaded on the controlled
channel.
SNAP Playlists / clips / trains:
Goes back to the last loaded record train at the timecode
where the E/E mode was exited, effectively “snapping”
back to where the user left off in the record train.