User's Manual Instruction Manual

Issue 5.8.B IPDirector V.5.8
–
User Manual
–
Part 7: Editing - IPEdit
EVS Broadcast Equipment - July 2010
32
3.9.5 SAVING THE AUDIO MONITORING PARAMETERS IN A
TEMPLATE
WHERE?
In the Template area, you can save the values assigned to the Input Gain and
Audio Channels parameters in a template, and reload them later on when
necessary.
HOW TO CREATE A TEMPLATE
To create a template of the audio monitoring parameters, proceed as follows:
1. Define the values for the Input Gain and Audio Channels parameters in the
AVH Config. window.
2. Type a name for the template in the Name field of the Template area.
3. Click Add.
When you click OK, the values defined in the template you have just created are
applied. If you want to apply different values, you need to modify them before
leaving the window or to load another existing template.
HOW TO LOAD A TEMPLATE
To load an audio monitoring template, proceed as follows:
1. Click the Audio Monitoring icon to open the AVH Config. window.
2. In the Template area, select the template that you want to load from the list
of available templates.
3. Click OK.
The values defined in the loaded template are applied.