User's Manual Owner's manual
Table Of Contents
- Copyright
- Disclaimer
- Improvement Requests
- Regional Contacts
- Part 1: General Workspace
- Part 2: Logging
- Part 3: Browsing
- Part 4: Ingest
- Part 5: Playout – Control Panel
- Part 6: Playout – Playlist Panel
- Part 7: Editing
- 1. Recorder Panel
- 2. Ingest Scheduler
- 2.1 INTRODUCTION
- 2.2 USER INTERFACE
- 2.3 MENU BAR OPTIONS
- 2.4 RECORDER CHANNELS STATUS AREA
- 2.5 TIMELINE AND INGEST OVERVIEW AREA
- 2.6 REMAINING CAPACITY AREA
- 2.7 CONTEXTUAL MENU
- 2.8 SETTINGS
- 2.9 CREATING SCHEDULED INGESTS
- 2.10 CREATING GROWING CLIPS
- 2.11 EDITING A SCHEDULED INGEST
- 2.12 DELETING A SCHEDULED INGEST
- 2.13 COPYING AN INGEST
- 2.14 MOVING AN INGEST
- 2.15 STOPPING AN INGEST
- 2.16 WORKING WITH GANGED CHANNELS
- 2.17 WORKING WITH LOG SHEETS
- 2.18 IMPORTING AND EXPORTING INGEST LISTS
- 3. VTR Control Panel
IPDirector Version 5.8
–
User Manual
–
Part 4: Ingest
EVS Broadcast Equipment – July 2010
Issue 5.8.B
47
2.16.1 HOW TO GANG TWO OR MORE INGEST CHANNELS FROM
INGEST SCHEDULER
To gang two or more channels, proceed as follows:
1. Select two or more channels using CTRL+click or SHIFT+click.
The selected channels are shown in blue.
2. Right-click one of the channels and select Gang.
3. The ganged channels are displayed with a chain symbol:
A block created on a channel is automatically created with the same properties on
all ganged channels.
2.16.2 HOW TO UNGANG TWO OR MORE INGEST CHANNELS FROM
INGEST SCHEDULER
To ungang two or more ganged channels, proceed as follows:
1. Select a ganged channel.
2. Right-click the channels and select Ungang.