User's Manual Owner's manual
Table Of Contents
- Copyright
- Disclaimer
- Improvement Requests
- Regional Contacts
- Part 1: General Workspace
- Part 2: Logging
- Part 3: Browsing
- Part 4: Ingest
- Part 5: Playout – Control Panel
- Part 6: Playout – Playlist Panel
- Part 7: Editing
- 1. Recorder Panel
- 2. Ingest Scheduler
- 2.1 INTRODUCTION
- 2.2 USER INTERFACE
- 2.3 MENU BAR OPTIONS
- 2.4 RECORDER CHANNELS STATUS AREA
- 2.5 TIMELINE AND INGEST OVERVIEW AREA
- 2.6 REMAINING CAPACITY AREA
- 2.7 CONTEXTUAL MENU
- 2.8 SETTINGS
- 2.9 CREATING SCHEDULED INGESTS
- 2.10 CREATING GROWING CLIPS
- 2.11 EDITING A SCHEDULED INGEST
- 2.12 DELETING A SCHEDULED INGEST
- 2.13 COPYING AN INGEST
- 2.14 MOVING AN INGEST
- 2.15 STOPPING AN INGEST
- 2.16 WORKING WITH GANGED CHANNELS
- 2.17 WORKING WITH LOG SHEETS
- 2.18 IMPORTING AND EXPORTING INGEST LISTS
- 3. VTR Control Panel
IPDirector Version 5.8
–
User Manual
–
Part 4: Ingest
EVS Broadcast Equipment – July 2010
Issue 5.8.B
33
• Click the Save button to save your scheduled ingest and leave the window
open to program another scheduled ingest.
A new block is created at the scheduled time in the tracks or sub-tracks
corresponding to the selected channels.
Refer also to section ‘Partial Block Display’ on page 19.
2.9.5 MAGNETIZE RULES
When an ingest is created by drag & drop action, the start and stop time values
are rounded according to a virtual grid. This grid uses different steps depending
on the current zoom factor.
These are the step values per zoom factor:
Zoom View Step
15 minutes 10 seconds
30 minutes 20 seconds
1 hour 40 seconds
2 hours 80 seconds
6 hours 4 minutes
12 hours 10 minutes
24 hours 20 minutes
2 days 40 minutes
1 week 1 hour
1 month 8 hours