User's Manual Owner's manual
Table Of Contents
- Copyright
- Disclaimer
- Improvement Requests
- Regional Contacts
- Part 1: General Workspace
- Part 2: Logging
- Part 3: Browsing
- Part 4: Ingest
- Part 5: Playout – Control Panel
- Part 6: Playout – Playlist Panel
- Part 7: Editing
- 1. Recorder Panel
- 2. Ingest Scheduler
- 2.1 INTRODUCTION
- 2.2 USER INTERFACE
- 2.3 MENU BAR OPTIONS
- 2.4 RECORDER CHANNELS STATUS AREA
- 2.5 TIMELINE AND INGEST OVERVIEW AREA
- 2.6 REMAINING CAPACITY AREA
- 2.7 CONTEXTUAL MENU
- 2.8 SETTINGS
- 2.9 CREATING SCHEDULED INGESTS
- 2.10 CREATING GROWING CLIPS
- 2.11 EDITING A SCHEDULED INGEST
- 2.12 DELETING A SCHEDULED INGEST
- 2.13 COPYING AN INGEST
- 2.14 MOVING AN INGEST
- 2.15 STOPPING AN INGEST
- 2.16 WORKING WITH GANGED CHANNELS
- 2.17 WORKING WITH LOG SHEETS
- 2.18 IMPORTING AND EXPORTING INGEST LISTS
- 3. VTR Control Panel
IPDirector Version 5.8
–
User Manual
–
Part 4: Ingest
EVS Broadcast Equipment – July 2010
Issue 5.8.B
1
1. Recorder Panel
1.1 INTRODUCTION
The Recorder Panel is the graphical user interface used to control the recorder
channels of an EVS video server. The Recorder Control Panel shows the record
status of a channel and can enable channels to start or stop recording depending
upon the EVS video server base configuration. In conjunction with the buttons on
the VGA, there are also keyboard shortcuts and dedicated buttons on the optional
ShuttlePRO controller. Where they are shown, these are the default settings.
Note
The keyboard shortcuts can be customized using the Define Shortcuts
item of the Tools menu from the main IPDirector menu.
1.2 OVERVIEW OF THE RECORDER PANEL
1.2.1 RECORDER PANEL OUTLINE