User's Manual User Manual

Issue 4.3.C

IP Director Version 4.3 – User Manual – Part 4 – System Management & Troubleshooting

EVS Broadcast Equipment

THE KEYWORDS ASSOCIATED WITH MY LOGS ARE

NOT PUSHED TO ITS ASSOCIATED CLIPS

The clips are created on an XT server which has no serial

connection to any IP Director workstation.

Check if the Edit Clip by Network parameter is activated on the

corresponding XT server. This allows the IP Director to edit the

clips on the server to be able to assign keywords to them.

I GET THE MESSAGE ‘ERROR WHILE CREATING

CLIP

’ WHEN I PROTECT THE MEDIA ASSOCIATED

WITH THE LOGS

The preview recorder cannot be changed when the first log has

been entered. If you do so, it is possible the ‘protect media

associated to logs’ operation fails.