User's Manual User guide

IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out

EVS Broadcast Equipment

Issue 4.3.C

HOW TO ASSIGN A CHANNEL FROM THE

CHANNEL FIELD

To assign a channel from the Control Panel, proceed as follows:

1. Right-click on the Channel field.

2. Select the channel to assign from the contextual menu

that displays the available channels.

HOW TO ASSIGN A CHANNEL FROM THE

SHUTTLEPRO

To assign a channel from the Shuttle PRO, proceed as follows:

1. Press the Select Player key on the ShuttlePRO controller.

This calls up a list of channels available to be controlled.

2. Use the jog dial to move through the list and highlight the

required channel.

3. Press the Select Player key again to assign the channel

and exit the menu.

Refer to the ShuttlePRO section of the manual for more

information on the configuration of the controller.

4.16 LOADING MEDIA

4.16.1 HOW TO LOAD A TRAIN IN THE CONTROL PANEL

To load a record train in the Control Panel, proceed as follows:

1. Open the Channel Explorer from the main menu.

2. Select the requested record train in the structure of the

XNet network.

3. Drag it to the Loaded Media field of the Control Panel.

The train is loaded in the Control Panel at the current timecode.