User's Manual User guide

Issue 4.3.C

IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out

EVS Broadcast Equipment

4.13.4 IMAGE CAPTURE SETTINGS

These settings relate to the Grab Frame option that is to be

found on the Transport Functions pane of the Control Panel.

DEFAULT PATH FOR CAPTURED IMAGES

This setting allows the operators to specify a path on which the

grabbed frames will be stored when the user clicks the Grab

Frame icon

in the Control Panel.

This path, which can be specified by each user, needs to point to

a shared folder on the TCP.IP network. The path needs to have

the following pattern:

\\MachineName\SharedFolder\.

CAPTURE IMAGES ON ALL GANGED RECORDERS

LINKED CLIPS

When this option is selected, the image grabbed on a clip will

also be grabbed:

• on all player channels ganged to the player channel on which

the clip is loaded.

• on all clips linked to the clip on which the image is grabbed.

4.14 CONTROL PANEL SHORTCUTS

In the IP Director main window, the menu Tools > Define

Shortcuts in the menu bar allows the users to define shortcuts

for most of the common operations with the IP Director.

Shown in the screenshots below are all items that are available

in the Control Panel with shortcuts, the default values are

shown. These can be modified and saved by the system user if

desired.

The greyed-out shortcuts are defined as Channel Management

shortcuts and available in the Control Panel. For more

information, refer to the Shortcut section.