User's Manual User guide

IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
Issue 4.3.C
73
Option Description
View Key Clip Displays the Key clip associated with
a Fill clip that is loaded
Delete Fill and Key
Link
Deletes the link between the Fill and
Key clips
Rename Opens the Update Clip Name window
from which the clip name can be
modified.
Modify T/C IN or
Date
Opens the Modify T/C In or Date
window from which you can modify
the IN timecode or date of a clip.
Duplicate Opens a Duplicate Clip window
where you can specify the location
on an XT server of the XNet Network
where a copy of the clip should be
stored.
Move Opens a Move Clip window where
you can specify the location on an
XT server of the XNet Network where
the clip should be moved to.
Show/Hide Video
Display
Shows the Video Display when it is
on or displays it when it is off. If the
Video Display is not linked to the
player channel, the option is greyed-
out.
4.13 SETTINGS
4.13.1 CLIP CREATION SETTINGS
Several settings linked to the clip creation can be defined in the
Clip Creation tab available from the Tools > Settings menu.
These settings are shortly described below:
GUARDBANDS
The guardbands are A/V material which is added on both sides of
the clip boundaries when the clip is created.
When a new clip is saved, the guardband defined in seconds in
this setting will automatically be added before the IN point of the
clip and after the OUT point of the clip.