User's Manual User guide

Issue 4.3.C

IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out

EVS Broadcast Equipment

Note

By right-clicking on the E/E button a contextual menu

will show the available record trains. Selecting a train

will go to that train at its current position. A train which

is being played through the network to this output

channel will be approximately 3 seconds behind current

network timecode.

The text below the E/E button indicates the record train which

the channel will return to when the E/E button is pressed.

4.5.13 DIRECT ACCESS BUTTONS TO THE TRAINS ON

THE

SHUTTLEPRO

There are also direct access buttons on the ShuttlePRO

controller to select trains on a channel:

PREVIOUS TRAIN: Selects the previously selected Record train,

pressing twice moves back another selection, etc…

NEXT TRAIN: Selects the next Record train, if on the ‘cam A’

train it will move to ‘cam B’, etc…

SELECT TRAIN: Calls up on the screen a list of channels

available. By moving the jog dial you can move through the list

to highlight the required train and press Select Train again to

select it and exit the menu.