User's Manual User guide

Issue 4.3.C
IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
20
3.5 VTR CONTROL PANEL MODE 3:
BATCH DIGITIZE MODE
3.5.1 PURPOSE
In Batch Digitize Mode , several clips can be queued in a
Batch list, so that they can all be digitized in one process run.
3.5.2 SCREEN ELEMENTS AND FUNCTIONS
The Transport Mode and Auto-edit Mode buttons and controls
remain the same in Batch Digitize Mode.
Refer to
• Section 4.19.1 on page 91 for Transport Mode
• Se
ction 3.4 on page 16 for Auto-edit Mode
Th
e extra fields and buttons for Batch List Mode are explained
below.
BATCH LIST MANAGEMENT BUTTONS
At the top of the list are the Batch List management buttons:
Field Name Instructions
Batch list
name
Contains the name of the currently active batch
list (if any).
Open Opens an existing batch list.
Close Closes the active batch list.
New Creates a new batch list.
Modify Modifies the properties of the active batch list.
Delete Deletes a saved batch list.