User's Manual User guide

IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
Issue 4.3.C
17
MARK IN - DURATION - MARK OUT
The Mark IN, Duration and Mark OUT fields are editable.
Values can be entered directly from the keyboard. After entering
two values, the third value is calculated automatically.
MARK IN / MARK OUT BUTTONS
Instead of entering values in the Mark IN - Duration - Mark OUT
fields, these values can be set by clicking the Mark IN and Mark
OUT buttons while the tape is playing.
Existing values can be cleared by clicking the corresponding
button.
Use the buttons
and to go respectively to the
Mark IN or Mark OUT frames.
RECORDER BAR
The Recorder bar shows the linked recording channel on the XT
server.
The device can be changed by right-clicking the blue bar and
selecting a device from the list that appears or by dragging a
record channel from the Channel Explorer. This selection is
required to be able to initiate the Auto-Edit or Bach Digitize
modes.
Note
A default recorder can be defined in the VTR Engine
configuration. If a default recorder channel is
associated, it is automatically assigned when selecting
a VTR channel.