User's Manual User guide

Issue 4.3.C
IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
16
Note
Some VTR devices may not support all the custom
speed values. When a custom speed is not available on
the VTR, the closest available speed will be used.
STATUS BAR
The status bar shows the current status of the VTR Control
Panel.
3.4 VTR CONTROL PANEL MODE 2:
AUTO-EDIT MODE
3.4.1 PURPOSE
In Auto-edit Mode , a single clip can be digitized from the
VTR to a record channel on an XT server. In the auto-edit
process, clips can be sent to different destinations and published
to user groups.
3.4.2 SCREEN ELEMENTS AND FUNCTIONS
The Transport Mode buttons and controls remain the same in
Auto-Edit Mode. Refer to section 3.3 “VTR Control Panel Mode
1
: Transport Mode”, on page 13 for details.
Th
e extra fields and buttons for Auto-Edit Mode are explained
below.