User's Manual User guide

IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
Issue 4.3.C
11
3.2 OPENING THE VTR CONTROL
PANEL
There are several ways of opening the VTR Control Panel:
• from Channel Explorer
• from the IP Director main toolbar
The procedures are described in detail on the following pages.
3.2.1 HOW TO OPEN THE VTR CONTROL PANEL
FROM CHANNEL EXPLORER
To open the VTR Control Panel from Channel Explorer, proceed
as follows:
1. Click Channel Explorer on the application toolbar.
2. In the Channel Explorer, browse to the VTR you wish to
control.
3. Double-click the VTR, in this example DVC PRO 50.
OR
Right-click the VTR and select Open VTR Control
Panel.
4. The VTR panel is opened and linked to DVC PRO 50.