User's Manual User guide

IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
Issue 4.3.C
173
DEFAULT A/V EFFECT PARAMETERS FOR
TRANSITIONS
This area allows the user to define the default audio and video
effects of elements added to the play-list using the dialogue box
to set the parameters:
Link Video and Audio Parameters Option
If this option is checked, any change made to a video parameter
will also be made to the corresponding audio parameter and vice
versa.
In the case where parameters are linked if wipe is selected in
the ‘video’ zone, a mix is automatically selected in the ‘Audio’
zone.
Video Effect and Audio Effect Zones
The following video or audio effects can be defined:
Effect Description
Cut The transition is defined as a cut (no effect).
Mix The transition is defined as a mix (dissolve
effect).
Wipe The transition is defined as a wipe effect. A
wipe type can be selected from the combo
box.
Effect
duration
set in seconds and frames.