User's Manual User guide

Issue 4.3.C
IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
134
MODIFY PLAYBACK PARAMETER VALUES IN A
PLAY-LIST
The playback parameters of an element or selection of elements
can be modified either by entering values directly in the list, by
using the contextual menu, or by selecting a choice from a pre-
defined list box accessed in the parameter area. When the
mouse is clicked on a value that can be modified on a selected
element, the value becomes editable. If the area is a combo
box, the combo box is opened and the operator can select the
setting required. If the area requires a value to be entered, the
value is selected in order for it to be modified.
If the ESC key is used on the keyboard, the editable area is
exited and the original cell value is restored.
If the ENTER key is pressed or a different area is clicked on, the
modifications will be validated.
VALUES MODIFIED BY DIRECT ENTRY
The values that can be modified by direct entry are:
Video Fx Dur Determines the length of the selected video
transition, a value in seconds and frames up
to 1 minute can be used.
Audio Fx Dur Determines the length of the selected audio
transition, a value in seconds and frames up
to 1 minute can be used.
Speed Determines the speed of playback for the
selected elements, a value as a percentage
between 0 and 400% can be entered.
Split Audio Determines a value for the time after a Video
transition that the audio transition will take
place.