User Manual User guide

Operation
User Interface
Button
Keyboard
Shortcut
ShuttlePRO key Description
Mark IN
or
Sets an IN point at
the timecode shown
in the Current
Timecode field and
corresponding to
the bullet indicator
position on the jog
bar. Then, a green
indicator represents
the IN point on the
jog bar.
Mark OUT
or
Sets an OUT point
at the timecode
shown in the
Current Timecode
field and
corresponding to
the bullet indicator
position on the jog
bar. Then, a red
indicator represents
the OUT point on
the jog bar.
Clear IN
+
Clears the IN point
which has just been
set and not yet
saved.
When applied to a
loaded clip, the
INpoint is set to the
Protect IN
timecode, before
the guardband.
Clear
OUT
+
Clears the OUT
point which has just
been set and not yet
saved.
When applied to a
loaded clip, the
OUTpoint is set to
the Protect OUT
timecode, after the
guardband.
IPClipLogger- Version 6.15- User Manual
8. Creating a Clip 65