User's Manual User guide

INSIO Version 1.1
–
User Manual
EVS Broadcast Equipment – October 2010
Issue 1.1.B
83
5.5 ASSIGNING METADATA
5.5.1 METADATA INFORMATION AND OVERVIEW OF THE METADATA
TAB
Metadata are data associated to all the clips of a take. This is done from the
Metadata tab of the Record/Review window.
Metadata may be of different types:
• Metadata linked to the project, episode, scene and take name or number
(labelled as 1 in the Overview of the tab). Their values are defined by the
system and cannot be changed by the users.
• Additional metadata defined at the setup system level in Setup > User >
Metadata (labelled as 2). They appear as empty fields in which the users can
enter free text.
• Take Rating displayed as four buttons (labelled as 3). Users can select one of
these buttons to associate a rating to the Take. By default, buttons correspond
to No rating, OK, Good, Best but this can be changed in the Setup.
• Take Acceptance, displayed as two buttons (labelled as 4). Users can select
one of these buttons to flag the take as Accepted or Not Accepted.
• The TC IN, TC OUT and TC duration values of the take are saved as metadata
as well (labelled as 5).
The Metadata tab only displays the metadata fields/buttons selected in Setup >
User > Metadata. However, timecode information display cannot be disabled from
the Setup. It is always displayed in the tab.