User's Manual User guide

INSIO Version 1.1
–
User Manual
EVS Broadcast Equipment – October 2010
Issue 1.1.B
75
Select a Take in the Clip List Tab
To load all the clips from a take at once, proceed as follows:
1. From the Left Clip List tab, select a Take line.
All the clip lines from the corresponding take are highlighted.
2.
In the Review tab, tap the Display Preset button .
The list of existing preset configurations is displayed.
3. Select one of the Preset configurations from the list.
Clips from the selected take and recorded by the cameras defined in the
selected preset player channel configuration are loaded on the player
channels defined in the preset.
4. To load clips from another take, select another take line from the Clip List
tab and tap the Load Take button.