User's Manual User guide

Issue 1.1.B INSIO Version 1.1
–
User Manual
EVS Broadcast Equipment – October 2010
72
3. Select one of the Preset configurations from the list.
4. Record the take by tapping the Start/In button then the Stop/Out button.
As soon as the Stop/Out button is tapped, clips recorded by the cameras
defined in the selected preset player channel configuration are loaded on
the Software Player channels or on the server player channels defined in
the preset.
5. If required, tap the Display Preset button after the automatic loading of
clips and select another preset configuration.
Clips recorded by the cameras defined in the newly selected preset player
channel configuration are loaded on the player channels defined in the
second preset.
6. You can unload a clip by selecting the line in the Review tab and tapping
the Unload Clip button.