User's Manual User guide

Issue 1.1.B INSIO Version 1.1
–
User Manual
EVS Broadcast Equipment – October 2010
16
Clip Display Name
The clip name format is user-defined and can be modified as described in section
‘How to Modify the Clip Display Name Format String’ on page 16.
Th
e user can reset the default filename by tapping the Reset button .
How to Modify the Clip Display Name Format String
To modify this default name format string, proceed as follows:
1. To add an information type specified in the Available Items list, select the
item in the drop-down list and tap the Add button to add the selected
item at the end of the filename string.
Available Items Meaning
%CLIP_LOUTH_ID Clip Louth ID on the Server
%PROJECT_NAME Project Name
%EPISODE_NAME Episode Name
%SCENE_NAME Scene Name
%TAKE_NO Take Number
%CHANNEL Recorder Channel
%CHANNEL_NAME Recorder Channel Name as
configured in the Record Setup tab.
%TCIN Timecode IN
%TCOUT Timecode OUT
%DEST_NAME1 Transfer Destination Path Name 1
%DEST_NAME2 Transfer Destination Path Name 2
2. In the Full Name field, delete the part of the string you do not want to keep
in the filename, if any.
3. To add a generic text in the Full Name string, type the text in the field.
Timecode Display
This setting allows you to display NTSC timecode as Drop Frame or Non Drop
Frame.