User's Manual User guide

Issue 1.1.B INSIO Version 1.1
–
User Manual
EVS Broadcast Equipment – October 2010
102
Once a transfer status has been selected, the Filter button is surrounded by a line
colored with the selected status color:
6.6.3 FAILED TRANSFERS
When transfer jobs have failed, you can initiate a new transfer attempt from one of
the two Clip List tabs. To do so, proceed as follows:
1. Tap the Filter button in the Clip List tab.
The Filter contextual menu opens.
2. Select Error.
Only the clips with an ‘Error’ transfer job status are listed.
3. Select all the clips.
4. Tap the Transfer button.