User's Manual User guide

Issue 1.1.B INSIO Version 1.1
–
User Manual
EVS Broadcast Equipment – October 2010
98
HOW TO MANUALLY TRANSFER CLIPS FROM A CLIP LIST TAB
To manually transfer one or several clip(s) from a Clip List tab, proceed as
follows:
1. Open one of the Clip List tabs.
2. Select the clips you want to transfer.
Selected clips become highlighted.
3. Tap the Transfer button on the Clip List tab.
The clips are transferred in the order they are displayed in the extended Transfer
Status window.
6.5.4 DESTINATION CHANGE
PREREQUISITES FOR DESTINATION CHANGE FROM THE
TRANSFER BUTTON
The following conditions must be met to be able to change the transfer
destinations from the Transfer button:
• the option Allow destination change via transfer button must have been
selected in the Destination Selection tab of the settings.
• the Automatic Transfer mode must not be activated.
AVAILABLE TRANSFER DESTINATIONS
When those prerequisites are met, the following window will be displayed as soon
as you tap the Transfer button.
Destination 1 Tab Destination 2 Tab
Actually, the selection is made not only on a transfer destination, but on a
complete destination configuration.
The two Destination tabs list all the destination configurations which have been