User's Manual Manual

Issue 1.0.D INSIO Version 1.0
–
User Manual
EVS Broadcast Equipment – October 2009
50
saved with the Save button, and you decide then not to keep the take:
press the Abort Clip button to abort the recording and to delete the clips from
the current take.
In both cases, the Start/In button becomes available again, the take number does
not increase and the clip names are removed from the list of cameras.
Note
When the Auto Save function is activated, you will only be allowed to
abort clip before pressing the Stop/Out button.
5.3.4 RECORDING A STREAM
RECORD WINDOW OVERVIEW
When the active record mode has been set to stream, the Record window layout is
limited as shown in the following screenshot:
The Status tab displays information on the stream transfer status. It contains one
box per camera and per destination path. Each box shows a thumbnail,
destination, clip name and current timecode.
In the screenshot above, 4 boxes are displayed as 4 cameras are streaming to 1
destination path. If 4 cameras stream to 2 destination paths, 8 boxes will be
present.