User's Manual Owner manual

GX server – Version 1.5 – Users Manual
EVS Broadcast Equipment – September 2011
Issue 1.5.A
23
HOW TO START AND STOP THE GX SERVER
The GX server can be started and stopped by clicking the switch icon in the
bottom right corner of the window. This button is a toggle button and works as
follows:
• To start the GX server, click on O.
The icon changes from to
• To stop the GX server, click on I.
The icon changes from to
PRINCIPLES ABOUT STARTING THE SERVER
Once the GX server is switched on, users can connect to and work on the server
via the web interface.
The following principles apply with a GX server:
• The GX server is not automatically started when it is switched on.
• Users need to start the GX server manually via the Start Server button in
the web interface when they want to play out the prepared fill and key clips.
• The GX server will only respond to the commands from the control protocol
once the GX server has been started.
• When the GX server is started, it is not possible to import original sequences
and/or create GX clips via the web interface until the server is stopped.