User's Manual User guide

Issue 1.0.C
GX server – Version 1.0 – User’s Manual
EVS Broadcast Equipment – February 2011
20
PRINCIPLES ABOUT STARTING THE SERVER
Once the GX server is switched on, users can connect to and work on the server
via the web interface.
The following principles apply with a GX server:
• The GX server is not automatically started when it is switched on.
• Users need to start the GX server manually via the Start Server button in
the web interface when they want to play out the prepared fill and key clips.
• The GX server will only respond to the commands from the control protocol
once the GX server has been started.
• When the GX server is started, it is not possible to import original sequences
and/or create GX clips via the web interface until the server is stopped.
4.3 OVERVIEW ON MAIN WINDOW
4.3.1 INTRODUCTION
The main window in the user interface contains two main areas shortly described
below:
Import area
Manage area
Access to
Server Control page