User's Manual

Epsio Version 1.63 – User’s Manual
EVS Broadcast Equipment – May 2011
Issue 1.63.C
33
Central Circle
The following virtual points are used as calibration points:
• both intersections between the central line and the central circle
• both upper ends of the 16-meter lines
• intersections between the central line and the touchlines (if necessary)
POSSIBLE ACTIONS USING THE MOUSE
Here are the possible actions you can perform in this step:
• To select a virtual point, right-click on it.
• To delete a virtual point, click on it.
• To add a virtual point, press CTRL + click on the virtual field at the position
where the point should be added.
• To remove a virtual point you have added, click on it.
ADDITIONAL TIPS
Here are the following tips to help you in this step:
• Once you have selected a virtual point, you can adjust its position in one of the
following ways:
o Pressing the arrow keys on the keyboard for small increments
o Pressing simultaneously SHIFT and the arrow keys on the keyboard for bigger
increments.
• When the mouse pointer is close to a virtual point, a red circle surrounds it, and
the arrow keys on the keyboard are automatically activated to enable you to
adjust the point.