User's Manual User guide

Epsio Version 1.60

–

User’s Manual

EVS Broadcast Equipment – July 2010

Issue 1.60.C

2. Configuration

2.1 OVERVIEW

The configuration in order to use Epsio with an EVS server has to be performed in

the Epsio application or on the EVS server side (via the EVS menu and the LSM

Remote Panel), depending on the configuration step.

2.1.1 CONNECTION STEPS

Before you can actually configure Epsio, you first need to set up Epsio and the

EVS server to communicate with each other:

# Step Where? See section

1. Starting the appropriate EVS server

application

EVS server 2.2.1

2. Activating the connection between

Epsio and the EVS server

Remote Panel 2.2.3

3. Checking the video feeds Epsio 2.2.4

2.1.2 CONFIGURATION STEPS

Once Epsio and the EVS server are properly connected, you can perform the

actual configuration steps.

# Step Where? See section

1. Calibrating the cameras Epsio 2.3

2. Configuring the Chroma Key settings Remote Panel

or Epsio

2.4

3. Customizing and loading the graphic

suite

Epsio 2.5

4. Defining the Replay settings Remote Panel 2.6