User Guide Instruction Manual

ENGSoft v1.5
This document is the exclusive property of OpenCube Technologies SAS and cannot be reproduced or distributed without prior authorization
44 / 63
Figure 75: Audio routing panel with a configured mapping
The audio configuration panel is divided in several zones:
l Thetoppartcontainsthenameofthecurrentaudioroutingconfiguration.Bydefaultnoconfigurationisset.
l Themiddlezonecontainsuptotwo audio layout graphs,eachonecorrespondingtoapossibleingestscenario,
fouroreightaudio.Eachlayoutmustbecompletelyconnectedtomakeavalidconfiguration.
l Thebottomzonecontainsasummaryofthestatusofthecurrentconfiguration,a"Save"buttontosavethecurrent
configurationanda"Saveas..."buttonwhichallowsyoutochoosethenameoftheconfigurationtosave.

Default audio routing configuration
Bydefaultnoroutingisappliedtothedestinationsubject.Astraightonetoonemappinggraphisapplied:sourcepin#1is
connectedtodestinationpin#1,sourcepin#2todestinationpin#2,andsoon.
Figure 76: Default audio mapping
Audio layout description
Thereareuptotwo audio layout graphsperaudioconfiguration, eachonecorrespondingtoapossibleingestscenario:
fouroreightaudio.