User Guide Instruction Manual

ENGSoft v1.5
This document is the exclusive property of OpenCube Technologies SAS and cannot be reproduced or distributed without prior authorization
26 / 63
11 Explorer Module
11.1 Overview
Thesequencescontainedinalltheselectedsourcesaredisplayedintheexplorerpanel.Youcancustomizetheexplorer
viewinanumberofdifferentways.
Figure 37: Explorer overview
Therearevariouscommandbuttonsontopoftheexplorerpanel:
The'Selectall'buttonselectsallthedisplayedsequences.
The'Unselectall'buttonclearstheexplorerselection.
The'Refresh'buttonupdatestheiconsandinformationofthedisplayedsequences.
The'Icon/List/Detailview'togglebuttonallowsyoutoswitchbetweenthethreeviewmodes.
Figure 38: The detail popup
iYoucanconfiguretheinformationyouwanttodisplayindetailviewintheexplorerby
right-clickingontheheaderviewbarandselectingthedetailsyouwant.Thesetofdetails
youcandisplaydependsonthesourcedevicetype.
The'Clipname/Userclipname' togglebuttonallowsyoutoswitchthenameofthesequences
betweenthefilenameandtheuser-definedname.