User Guide Instruction Manual

ENGSoft v1.5
This document is the exclusive property of OpenCube Technologies SAS and cannot be reproduced or distributed without prior authorization
21 / 63
10.3.2 e-VTR source
ENGSoftusestheFTPconnectiontobrowseandingesttapesone-VTRdevices.
AsSONY e-VTRdevicesareaccessibleviaFTPconnectionandthusarenotplugandplaydevices,thee-VTRsourcecon-
figurationisslightlydifferentfromthatofothersources.
Figure 29: e-VTR source module
Ine-VTRmode,sequencescannotbeplayedbackandauto-ingestisnotavailable.
Toconfiguree-VTR,clickonthe button.The"Configuree-VTR-FTPconnection"windowappears.Youhavetofillin
eachfield:
l Alias:namedisplayedinthecombobox;
l FTPAddress:IPaddressofthee-VTR;
l Port:FTPportofthee-VTR(21bydefault);
l Login:logintologonontothee-VTR(e-VTRbydefault);
l Password:passwordtologonontothee-VTR(e-VTRbydefault).

Figure 30: e-VTR configuration
Onceyouhavefilledinallthefields,youcanchecktheparametersbyclickingonthe[Test Connection]button.
Astatusmessagewillbedisplayedattheleftofthe[Test Connection]button.
Figure 31: e-VTR configuration connection status
Iftheconnectionissuccessful,clickon[OK].