User Guide Instruction Manual

ENGSoft v1.5
This document is the exclusive property of OpenCube Technologies SAS and cannot be reproduced or distributed without prior authorization
20 / 63
Figure 22: P2 content in the explorer module Figure 23: XDCAM content in the explorer module
10.3.1 Manual configuration
Ifyourdeviceisnotlistedinthecombobox,youcanconfiguretheremovablemediamanuallybyclickingonthe but-
ton.The“Selectdevicetype”windowisdisplayed.
Figure 24: Source Module - manual configuration
Chooseonefromamongtheunrecognizeddevicesandassignitatypeofdevicetoemulate,andthenclickOK.
êThefilesystemontheremovablemediamustcomplywiththatontheemulateddeviceinordertoworkproperly.For
example,afullycompliantCONTENTSfoldermustbepresentonaP2emulateddeviceaswell.
Figure 25: Manual configuration P2 mode
Figure 26: Manual configuration XDCAM mode
Figure 27: Resulting emulated P2 device
Figure 28: Resulting generic XDCAM device