User Guide Instruction Manual

ENGSoft v1.5
This document is the exclusive property of OpenCube Technologies SAS and cannot be reproduced or distributed without prior authorization
19 / 63
10.3 Real mode
Inrealmode,thesourcemoduleallowsyoutobrowseanysupportedtypeofsourcedevice.Italsoallowsyoutoconfigure
anyremovablemediaasacompatiblesource.
iTherearenoregisteredCANONXF-Seriescardreaders.YouhavetoconfigureCANONXF-SeriesCFcardreadersman-
ually.
Figure 19: Source module (P2 mode)
Thecomboboxinthesourcemoduledisplaysthedrivesthatarerecognizedand
currentlyconnected.
Theconfigurebuttonallowsyoutoconfigureanunrecognizeddevice.
The'Selectall'buttonselectsalltheavailablemediainthecurrentdevice.
The'Unselectall'buttonunselectsallofthecurrentdevice'smediaatthesame
time.
The'Refresh'buttonrestartstheentiredevicedetectionprocess.Itisadvisableto
forcethedetectionofdevicesthathavenotyetbeenrecognizedandtocleanupall
cachedinformation.
Thetogglebuttonusedtoswitchtovirtualmode.
Tobrowseamediumintheexplorer,selectadeviceinthesourcemodule'sdevicedrop-downlistandclickonthemedium
icon.
Figure 20: Source Module: browsing a P2 medium
Figure 21: Source Module: browsing a XDCAM medium