User Guide Instruction Manual

ENGSoft v1.5
This document is the exclusive property of OpenCube Technologies SAS and cannot be reproduced or distributed without prior authorization
13 / 63
6.5 Configuring the IPDirector connection
TheIPDirectorconfigurationpanelcanbeaccessedviathesystemmenu[ Options > Configure IPDirector ].
The“Server”areacontainstheinformationrequiredtoconnecttotheIPDirectorwebservice.
l The"Address"fieldshouldbefilledinwiththeIPaddressorthehostnameoftheIPDirectorwebserviceserver.
l TheTCPportis31016bydefault.Unlessitisconfiguredotherwiseontheserversideitshouldnotbemodified.
l Thefieldonthefarrightisthenameofthewebserviceaccesspageandshouldnotbemodified.

The“Authentication”areacontainsthelogin/passwordtoconnecttotheIPDirectorwebservice. Ifyoudonotcheckthe
"Savepassword"box,youwillhavetotypeinyourcredentialagainatthenextstartupofENGSoft.

Figure 10: IPDirector configuration panel