User's Manual User guide

EditRec – User Manual
EVS Broadcast Equipment
Issue 11.00.B
21
4.1.4 AUDIO CHANNEL ASSIGN CONFIGURATION
There are 4 keys as audio edit preset on the keyboard of BVE-9100. Physically 2
keys (A1&A2) but Shift enables to reach (A3&A4).
These 4 keys are directly linked to EDL. Display of edit preset information on the
monitor is as below.
“VA1234”. BVE-9100 can assign up to 4ch of digital audio per 1 key. This
assignment is made in menu:
Press “Shift” + “Setup” -> F3 “IDC” -> Select the EditRec port -> F4 Audio Channel
Assign
Normal Assign
KEY D1 D2 D3 D4 D5 D6 D7 D8
1 X
2 X
3 X
4 X
Assign 2 channels to 1 key by Setup
KEY D1 D2 D3 D4 D5 D6 D7 D8
1 X X
2 X X
3 X X
4 X X
Assign particular channel to 1 key by Setup
KEY D1 D2 D3 D4 D5 D6 D7 D8
1 X X X X
2 X X
3 X X
4
Following this assignment, the information DA1 to DA8 and A1 to A2 are sent
through the 9-pin RS422 CMD and interpreted by the VTR.