User's Manual User guide

EditRec – User Manual
EVS Broadcast Equipment
Issue 11.00.B
19
4. Third Party
Configurations
4.1 BVE 9100
4.1.1 PREROLL
Press “INI” key.
With arrows select Preroll and enter “5:00”.
4.1.2 PORT ASSIGNMENT
Press “INI” key -> F3 “ASSIGN”.
With arrows select the port where are connected the recorder channel and player
channel.
For each channel select:
• type of device : “VTR”.
• log ID : P2, P2, P3 (for player channel) or R (for recorder channel).
4.1.3 IDC PARAMETER
EDITREC CHANNEL
Press “Shift” + “Setup” -> F3 “IDC”-> Select the EditRec port ->F1 Machine
Parameter Group -> F1 “Constant 1”
and enter the following parameters:
DATA1 DATA2 DATA3 DATA4 DATA5 DATA6 DATA7 DATA8
PAL : F1 25 00 32 14 14 00 80
NTSC: F0 25 00 32 14 14 00 80
Press “Shift” + “Setup” -> F3 “IDC”-> Select the EditRec port ->F1 Machine
Parameter Group -> F2 “Constant 2”