User's Manual User guide

Issue 11.00.B
EditRec User Manual
EVS Broadcast Equipment
12
3. EditRec Operating
3.1 EDITREC MENUS WITH MULTICAM 10
3.1.1 INTRODUCTION
Various menus have been implemented to configure the EditRec, load Playlist onto
the Edit Recorder and monitor various processes.
Do not forget that the M10.03 version is still working with LSM Playlist objects,
Each audio track can be edited separately .Playlist are filled with clips
automatically created during the recording phase of edit. The server will refuse
any additional edit if the number of existing clips used in all local playlists (for
EditRec and for other users) exceeds 5400 clips.
3.1.2 EDITREC SETTINGS
This page of the Setup configuration module allows changing several behaviors of
EditRec Channel.
SETUP CONFIGURATION
Sh+ESC:VGA EXPLORER (SH)F3:RESET(ALL) F6:KW1 F7:KW2 F8:SRCH F9:CLIP F10:PLST
╔══════════════════════════════════════════════════════════════════════════════╗
PROTOCOL: EditRec 1 Setting
Time Code Settings Playlist Settings
Start TC: 10:00:00;00 DF <ENTER> Load PL: 60 (LSM ID) <ENTER>
Preroll: 05s00fr Rename PL: MyEditPLName <ENTER>
Edit TC settings: Default PL: 60
Serial Sony LTC: Edit TC Clear PL: 60 EDL + CLIPS <ENTER>
Serial Sony VITC: Edit TC
Insert TC in SDI: YES EDIT TC <ENTER> CLEAR UNUSED EDITREC CLIPS <ENTER>
User TC of created clips : Edit TC CLOSE EDIT: <ENTER>
OSD settings EE : OFF <ENTER>
Super : YES Stop behavior : PB
Display Sel. : TC Status Name Clip Name: EditR
TC H-Pos : 4 Name H-Pos: 0 Clip VARID:EditR6789012345678901234
TC V-Pos : 10 Name V-Pos: 0
Audio settings:
Non-linear Editing at current TC: Edit Audio Fade: NO
Insert Black: 00:01:00fr <ENTER>
Delete Content: 00:01:00fr <ENTER> Edit: <UNDO>
═════════════════════════════════════════════════════════════════════════════
TAB:SELECT <-/->:CHANGE PgUp:Pg3 F4:SAVE AS F5:LOAD ALT+Q:EXIT MULTICAM