User's Manual User Manual

ManualsBrandsEVS ManualsAccessories for videoEditRec Version 2.8 - July 2010

User’s Manual

Version 2.8 - July 2010

Protocol for Linear Editing

Summary of content (23 pages)

PAGE 1
User’s Manual Version 2.
PAGE 2
EditRec V2.8 – User Manual EVS Broadcast Equipment Issue 2.8.C C OPYRIGHT EVS Broadcast Equipment – Copyright © 2010. All rights reserved. D ISCLAIMER The information in this manual is furnished for inform ational use only and subject to change without notice. While every effort has been made to ensure that the information contained in this user manual is accurate, up-to-date and reliable, EVS Broadcast Equipment cannot be held responsible for inaccuracies or errors that may appear in this publication.
PAGE 3
Issue 2.8.C EditRec V2.8 – User Manual EVS Broadcast Equipment Table of Contents TABLE OF CONTENTS .................................................................................................... II 1. INTRODUCTION....................................................................................................... 3 2. EDITREC SETUP PROCEDURE ............................................................................. 5 2.1 MULTICAM VERSION 10.03 INSTALLATION ..................................
PAGE 4
EditRec V2.8 – User Manual Issue 2.8.C EVS Broadcast Equipment 1. Introduction This document describes how to configure EVS server in linear editing environments. This document reflects the status of Multicam version 10.03 and higher and its current lim itations. Multicam 10 release version will be the first version to release the EditRec feature.
PAGE 5
Issue 2.8.C EditRec V2.
PAGE 6
EditRec V2.8 – User Manual Issue 2.8.C EVS Broadcast Equipment 2. EditRec Setup Procedure 2.1 MULTICAM VERSION 10.03 INSTALLATION Use the standard Multicam 10 installation procedure: • Create usb key • Install on target EVS Server (format if required, or upgrade) • Remove usb key • Restart the server The version can also be installed by XnetMonitor. 2.2 EVS SERVER CONFIGURATION 2.2.
PAGE 7
Issue 2.8.C EditRec V2.8 – User Manual EVS Broadcast Equipment A UDIO C ONNECTIONS : • Easiest way is to work with Embedded audio format. No additional audio connections are required in this case. • If digital/analog audio is required (i.e. an external Audio mixer is required), AES XLR or BNC connections are possible, provided the server has the correct audio backplane configuration. Use the correct input and output connector as required. 2.2.
PAGE 8
EditRec V2.8 – User Manual EVS Broadcast Equipment Issue 2.8.C Here is the typical basic configuration for a 6ch Server. You must respect the following restrictions: • “Spotbox Sony” as basic configuration. • EditRec has to be declared for one PGM and one REC (no special pairing is required), and use the same serial connection number. • No restrictions for other channels. Usually PGM2 and PGM3 are controlled in Sony protocol by Linear Edit Controller as “ source” VTR.
PAGE 9
Issue 2.8.C EditRec V2.8 – User Manual EVS Broadcast Equipment 3. EditRec Operating 3.1 EDITREC MENUS Various menus have been im plemented to configure the EditRec, load Playlist onto the Edit Recorder and monitor various processes. Do not forget that the M10.03 version is still working with LSM Playlist objects, Each audio track can be edited separately .Playlist are filled with clips automatically created during the recording phase of edit.
PAGE 10
EditRec V2.8 – User Manual Issue 2.8.C EVS Broadcast Equipment Parameter Values/ Range Default value Description 00:00:00:00 to 23:59:59:29 10:00:00:0 0 Selects the TC of your EditRec Playlist 05s00fr Selects the duration of the Playlist Preroll Time Code settings: Start TC: 10:00:00;00 DF /DF, NDF Preroll: 05;00fr 00s00fr to 59s00fr (Need the TC Edit TC settings: Serial Sony LTC: Edit TC Edit TC Edit TC Currently, this setting is locked.
PAGE 11
Issue 2.8.C EditRec V2.8 – User Manual EVS Broadcast Equipment Parameter Values/ Range Default value Description EditR6789 012 The VarID of clips created by EditRec0 10 to 99 60 Loads the selected playlist. 12 charact. EditPLyy Renames the playlist. 10 to 99 60 Chooses the default playlist loaded at start. 10 to 99 Current loaded PL number Deletes the selected playlist. reserved for the server. Clip VARID: EditR6789012 . 24 characters are modifiable by user.
PAGE 12
EditRec V2.8 – User Manual Issue 2.8.C EVS Broadcast Equipment Parameter Values/ Range Default value Description the 9 last EditRec actions. Non-linear Editing at current TC: Insert Black: 00:01;00fr Delete Content: 00:01;00fr 00:00;01fr to 59:59;29fr 00:10:00fr Inserts a selected duration BlackClip from the current position. 00m00s01fr to 59m59s29fr 00:10:00fr Deletes the content (selected duration) from the current position. OSD settings: Super : YES Activates OSD.
PAGE 13
Issue 2.8.C 12 EditRec V2.
PAGE 14
EditRec V2.8 – User Manual EVS Broadcast Equipment 3.2 Issue 2.8.C SPECIAL FUNCTIONS Several commands have been re-used for other use. 3.2.1 UNDO Undo function allows canceling up to the last nine edits. This function is accessible through 2 ways: • F2 menu page ( E d i t : < U N D O > ) • Linear Edit Controller through the use of the “EJECT” command to the “recorder” channel. This will undo the last Edit executed onto the recorder. This is particularly useful in PreRead mode! 3.2.
PAGE 15
Issue 2.8.C EditRec V2.8 – User Manual EVS Broadcast Equipment 4. Third Party Configurations 4.1 BVE 9100 4.1.1 PREROLL Press “INI” key. With arrows select Preroll and enter “5:00”. 4.1.2 PORT ASSIGNMENT Press “INI” key -> F3 “ASSIGN”. With arrows select the port where are connected the recorder channel and player channel. For each channel select: • type of device : “VTR”. • log ID : P2, P2, P3 (for player channel) or R (for recorder channel). 4.1.
PAGE 16
EditRec V2.8 – User Manual Issue 2.8.
PAGE 17
Issue 2.8.C 4.1.4 EditRec V2.8 – User Manual EVS Broadcast Equipment AUDIO CHANNEL ASSIGN CONFIGURATION There are 4 keys as audio edit preset on the keyboard of BVE-9100. Physically 2 keys (A1&A2) but Shift enables to reach (A3&A4). These 4 keys are directly linked to EDL. Display of edit preset information on the monitor is as below. “VA1234”. BVE-9100 can assign up to 4ch of digital audio per 1 key.
PAGE 18
EditRec V2.8 – User Manual EVS Broadcast Equipment 4.2 PLUGIN EDITOR/SONY SWITCHER 4.2.1 SONY SWITCHER Issue 2.8.C To use the Plug-in Editor, it is necessary to configure several settings in the Sony Switcher: Page 7355: Port Assignment Page 7332.1: Input Assignment Page 7332.3: Embedded Input Filtering (Audio through) Page 7333.1: Output Assignment Page 7333.3: Embedded Output Filtering (Audio through) Page 7322.1: Control Panel Key Assignment Page 7322.
PAGE 19
Issue 2.8.C EditRec V2.8 – User Manual EVS Broadcast Equipment Press “Shift + Aux” (INIT) -> F6 “ASSIGN3”. With arrows select PGM and enter the parameter 124. IDC P ARAMETER Press “Ctrl+ Aux” (Setup) -> F5 “VTR Control”. With arrows select the port where are connected the recorder channel and player channel.
PAGE 20
EditRec V2.8 – User Manual EVS Broadcast Equipment Issue 2.8.C A UDIO C HANNEL A SSIGN C ONFIGURATION Press “Ctrl+ Aux” (Setup) -> F2 “Audio Assign”. Assign ‘F’ key to Audio tracks. The Plug-in Editor supports until 16 audio tracks. P REROLL Press “Shift + Aux” (INIT) -> F1 System. With arrows select Preroll and enter “5:00”.
PAGE 21
Issue 2.8.C EditRec V2.8 – User Manual EVS Broadcast Equipment Regional Contacts AM ERICA (NORTH & LATIN) EVS Americas Tel: +1 973 575 7811 Fax: +1 973 575 7812 Tech. line: +1 973 575 7813 usa@evs.tv EVS Canada Tel: +1 514 750 7544 Fax: +1 514 750 7518 Tech. line: +1 973 575 7813 usa@evs.tv EVS Australia Tel: +61 02 9452 8600 Fax: +61 02 9975 1368 Mobile: +61 420 307 387 sales@evs-asia.com.hk EVS China Tel: +86 10 6808 0248 Fax: +86 10 6808 0246 Tech. line: +86 139 1028 9860 evschina@evs.
PAGE 22
EditRec V2.8 – User Manual Issue 2.8.C EVS Broadcast Equipment Tech. line: +33 1 46 99 9003 EVS Iberica Tel: +34 91 490 3930 Fax: +34 91 490 3939 Tech. line: +34 91 490 3933 iberica@evs.tv EVS Italy Tel: +39 030 296 400 Fax: +39 030 294 3650 Tech. line: +39 334 631 1493 italy@evs.tv EVS Middle East Tel: +971 4 365 4222 Fax: +971 4 425 3501 Mobile: +971 50 887 8758 middle-east@evs.tv EVS UK Tel: +44 1372 387 250 Fax: +44 1372 387 269 Tech. line: +44 1372 387 266 uk@evs.
PAGE 23
EVS Broadcast Equipment Liège Science Park 16, rue Bois St Jean B-4102 Ougrée Belgium Corporate Headquarters North & Latin America Headquarters Asia & Pacific Headquarters Other regional offices available on +32 4 361 7000 +1 973 575 7811 +852 2914 2501 www.evs.tv/contact To learn more about EVS go to www.evs.