Instruction manual

Network Camera
63
INPUTS/OUTPUTS
Video Output
ii
1 Composite, 1 Vp-p
Audio Input 1 line in
Audio Output 1 line out
Alarm Input
1 TTL, NC/NO programmable, 4.3V (NC) or 0.3V (NO) threshold,
5 VDC
Alarm Output 1 TTL open collector, 30mA @ 5 VDC
Network Connectivity 10/100 Mbps Ethernet
ii
It is intended for video preview while adjusting the camera.
CONNECTORS
Video Output
iii
Terminal block
Audio In/Out Terminal block (mono)
Alarm In/Out Terminal block
Ethernet Port RJ-45
iii
It is intended for video preview while adjusting the camera.
GENERAL
Dimensions (Ø x H) 6.3" x 4.4" (159mm x 112mm)
Shipping Dimensions
(W x H x D)
8.1" x 6.9" x 8.1" (205mm x 175mm x 205mm)
Unit Weight
Vandal dome model: 1.9 lbs. (0.87kg)
Plastic dome model: 1.1 lbs. (0.51kg)
Shipping Weight
Vandal dome model: 2.6 lbs. (1.18kg)
Plastic dome model: 1.8 lbs. (0.82kg)
Operating Temperature
Heater non-supported model: 14°F to 122°F (-10°C to 50°C)
(Boot up temperature: 32°F to 122°F (0°C to 50°C))
Heater supported model: -4°F to 122°F (-20°C to 50°C)
Operating Humidity 0% to 90%
Power Supply 12 VDC, PoE (Power over Ethernet) (IEEE 802.3af, Class 2)
Power Consumption Max. 4.8W (Max. 19.2W when the heater is operating)
Approval FCC, CE, IP66
iv
iv
It is for a heater supported model only.
Specifications are subject to change without notice.