Instruction manual

Network Camera

Chapter 4 — WebGuard

You can monitor live video images from the camera or search recorded image saved in the SD

memory card on the web browser by using the WebGuard program.

Computer system requirements for using WebGuard are:

 Operating System: Microsoft

Windows

XP x86 (32 Bit) (Service Pack 3), Microsoft

Windows

Vista x86 (32 Bit) (Service Pack 1) or Microsoft

Windows

7 x86 (32 Bit)

 CPU: Intel Pentium III (Celeron) 600MHz or faster (Core 2 Duo E4600 recommended)

 RAM: 128MB or more (2GB recommended)

 VGA: 8MB or more (128MB recommended) (1024x768, 24bpp or higher)

 Internet Explorer: Version 6.0 or later

Start Internet Explorer on your local PC. You can run the WebGuard program by entering the

following information in the address field.

− “http://IP address:port number”

(The camera IP address and the WebGuard port number set during the port setup)

− Or, “http://DVRNS server address/camera name”

(The DVRNS server address and the camera name registered on the DVRNS server)

NOTES:

 Enter https instead of http if you have checked the Use HTTPS box during the WebGuard port

number setup. Click Continue to this website (not recommended) when the security certificate

warning page is displayed. When the WebGuard login page is not displayed, check Internet

option settings as follows:

– Go to Tools, then Internet Options, and then the Security tab → Click the Custom level… button

→ Set the setting of Reset custom settings to Medium-high (default) or Medium.

– Go to Tools, then Internet Options, and then the Advanced tab → Check the Use TLS 1.0 box

under the Security option.

 You do not need to enter the WebGuard port number if the WebGuard port number is set to

80 (443 when entering https) when running the WebGuard program by entering the IP address

and port number.

Enter your ID and PASSWORD and click the [LOGIN]

button.

NOTES:

 WebGuard only works with Microsoft Internet Explorer and will NOT work with other web browsers.

 Do NOT close the LOGIN window during the WebGuard operation, otherwise, it will cause

a script error when switching between Web monitoring and Web search modes, and you will

need to restart the WebGuard program.