Instruction manual

User’s Manual
28
MAT
Check the MAT box to use the MAT (Motion Adaptive Transmission) function for video streaming
and recording. This function is available only when the slow shutter mode is set to off. Refer to
the Video – Camera (Exposure tab) setup for details about the slow shutter mode setting.
 Sensitivity: Set the motion sensitivity. The higher the number is, the more sensitive it is.
 Inactivity Period: Set the inactivity period. The camera will transmit or record images in Frame
Rate set below until any change is detected after the inactivity period when no motion is detected
during the preset inactivity period.
 Frame Rate: Select the frame rate to be applied when no motion is detected. This frame rate
cannot exceed or be the same as the frame rate in the Video – Streaming menu. The selected
frame rate will be applied until any motion is detected after the inactivity period and will return
to the normal frame rate set during the Stream setup immediately upon detecting any motion.
NOTE: The MAT (Motion Adaptive Transmission) function allows you to reduce bandwidth overload
and to save storage capacity by reducing the frame rate when no motion is detected. The camera
considers that no motion is detected when no change is detected between two consecutive images
based on the sensitivity setting.